Understanding the Product Price Pricing Method

Aaron Aldrich Updated by Aaron Aldrich

Introduction

The Product Price pricing method allows you to sell a product using a fixed unit price, such as a price per square foot, while still tracking the actual material and production costs behind the scenes. This approach is useful when your selling price is standardized, but you still want visibility into your true production costs and pricing breakdown.

This article is designed to supplement the video below, with terminology and steps aligned directly to the walkthrough demonstrated.

Related video: Product Pricing method

Steps

Step 1 – Create or Copy a Product

In this example, an existing product will be copied.

  1. Navigate to Settings > Products.
  2. Locate an existing product you would like to use as a template.
  3. Create a copy of the product.
  4. Rename the copied product to distinguish it from the original.
    • Example: Product Price Method
Step 2 – Change the Pricing Method
  1. Open the copied product.
  2. Navigate to Configure Pricing.
  3. Locate the Pricing Method setting.
  4. Change the pricing method from Standard to Product Price.
  5. Once selected this should Save automatically.
Step 3 – Set the Product Selling Price
  1. In the pricing configuration section, leave the Cost Unit field set to $0 if you do not want a predefined product cost.
  2. Enter the desired selling price in the Price field.
    • Example: $6.00
  3. Select the appropriate pricing unit.
    • Example: Square Foot
  4. Product will Save automatically.

This establishes the fixed selling rate that will be used when quoting the product.

Step 4 – Use the Product Template Interface
  1. Configure the product template as needed.
  2. Add materials, ink, finishing options, and production components.

The product template will continue to collect information and calculate production costs, but it will not determine the final selling price.

Step 5 – Verify Pricing Behavior
  1. Open Check Pricing.
  2. Enter the product dimensions or required measurements.
    • Example: 10 ft x 3 ft banner
  3. Verify the calculated quantity.
    • Example: 30 square feet
  4. Confirm that the selling price uses the established product rate.
    • Example:
      • 30 sq. ft. × $6.00 = $180.00
Step 6 – Review the Pricing Breakdown
  1. Scroll to the Pricing Breakdown section.
  2. Review the material, ink, and production cost calculations.
  3. Confirm that the costs are being calculated correctly.
  4. Verify that the final selling price remains based on the product price method rather than the individual material selling prices.

The pricing breakdown provides visibility into your true production costs while preserving the fixed selling price established at the product level.

Notes & Tips

🔹 Tip: The Product Price method is ideal when you have a standard market rate, such as charging a fixed amount per square foot, per linear foot, or per unit.

🔹 Tip: All materials, labor, and production components can still be included in the product template so that accurate cost reporting is maintained.

🔹 Tip: The Pricing Breakdown section can be used to evaluate profitability by comparing actual production costs against your fixed selling price.

⚠️ Warning: Material pricing, ink pricing, and other component selling prices do not affect the final customer price when using the Product Price method.

⚠️ Warning: Custom fields are informational only unless specifically configured to drive production logic. They do not modify pricing under the Product Price method.

⚠️ Warning: Additional charges generated by product options, such as double-sided printing, may be ignored because pricing is controlled by the established product-level price. Review your setup carefully to ensure all desired charges are accounted for.

Outcome / Summary

After following these steps, you should be able to:

  • Configure a product to use the Product Price pricing method.
  • Establish a fixed selling price based on a specific unit of measure.
  • Maintain detailed material and production cost tracking.
  • Review profitability using the Pricing Breakdown section.
  • Quote products using a standardized selling rate regardless of material pricing variations.
  • Understand how additional options and custom fields interact with the Product Price pricing structure.

How did we do?

Golden Product List Overview & Resource Guide

Create a Custom Screen Print Product using the Golden Product as a Template