Mastering the Use of *, /, +, -, >, <, >=, <=, % in Ternary Operations

Tyler MacDonald Updated by Tyler MacDonald

When working with ternary operations in shopVOX, understanding the proper use of arithmetic and comparison operators is crucial. These operators allow you to perform mathematical calculations and make conditional decisions based on the results. In this article, we'll explore the use of *, /, +, -, >, <, >=, <=, and % within ternary operations, providing a comprehensive guide to their correct usage.

Note: In the following examples, the term "area" is used to symbolize using a formula or picking a system formula. The word "area" is not a supported term in shopVOX and is used here for educational purposes only.

Arithmetic Operators: *, /, +, -, %

Arithmetic operators are used to perform basic mathematical operations.

  • * (Multiplication): Multiplies two operands.
  • / (Division): Divides the first operand by the second.
  • + (Addition): Adds two operands.
  • - (Subtraction): Subtracts the second operand from the first.
  • % (Modulus): Returns the remainder of a division operation.

Example of * in a Ternary Operation

Consider a scenario in shopVOX where you want to apply a different area calculation based on whether a job is double-sided:

(Double_Sided) ? area * 2 : area;

In this example:

  • If Double_Sided is true, the area is doubled.
  • If Double_Sided is false, the area remains the same.

Example of / in a Ternary Operation

Consider a scenario in shopVOX where you want to apply a different division based on whether an area should be halved:

(half_area) ? area / 2 : area;

In this example:

  • If half_area is true, the area is divided by 2.
  • If half_area is false, the area remains the same.

Example of + in a Ternary Operation

Consider a scenario in shopVOX where you want to add different lengths based on a condition:

(add_lengths) ? length1 + length2 : length1;

In this example:

  • If add_lengths is true, length1 and length2 are added.
  • If add_lengths is false, only length1 is used.

Example of - in a Ternary Operation

Consider a scenario in shopVOX where you want to subtract a bonus square footage from the area based on a condition:

(Bonus_Sqft) ? area - 100 : area;

In this example:

  • If Bonus_Sqft is true, 100 is subtracted from the area.
  • If Bonus_Sqft is false, the area remains the same.

Example of % in a Ternary Operation

Consider a scenario in shopVOX where you want to adjust the area based on whether the quantity is even or odd:

(svLineItem_qty % 2 === 0) ? area : area * 1.5;

In this example:

  • If svLineItem_qty % 2 equals 0, the area remains the same.
  • Otherwise, the area is multiplied by 1.5.

Comparison Operators: >, <, >=, <=

Comparison operators are used to compare two values.

  • > (Greater Than): Returns true if the left operand is greater than the right operand.
  • < (Less Than): Returns true if the left operand is less than the right operand.
  • >= (Greater Than or Equal To): Returns true if the left operand is greater than or equal to the right operand.
  • <= (Less Than or Equal To): Returns true if the left operand is less than or equal to the right operand.

Example of > in a Ternary Operation

Consider a scenario in shopVOX where you want to adjust the area based on whether the quantity exceeds a certain threshold:

(svLineItem_qty > 100) ? area * 1.5 : area * 2;

In this example:

  • If svLineItem_qty is greater than 100, the area is multiplied by 1.5.
  • Otherwise, the area is multiplied by 2.

Example of < in a Ternary Operation

Consider a scenario in shopVOX where you want to adjust the area based on whether the quantity is below a certain threshold:

(svLineItem_qty < 100) ? area * 2 : area * 1.5;

In this example:

  • If svLineItem_qty is less than 100, the area is multiplied by 2.
  • Otherwise, the area is multiplied by 1.5.

Example of >= in a Ternary Operation

Consider a scenario in shopVOX where you want to adjust the area based on whether the quantity meets or exceeds a certain threshold:

(svLineItem_qty >= 100) ? area * 1.5 : area * 2;

In this example:

  • If svLineItem_qty is greater than or equal to 100, the area is multiplied by 1.5.
  • Otherwise, the area is multiplied by 2.

Example of <= in a Ternary Operation

Consider a scenario in shopVOX where you want to adjust the area based on whether the quantity is within a certain limit:

(svLineItem_qty <= 100) ? area * 2 : area * 1.5;

In this example:

  • If svLineItem_qty is less than or equal to 100, the area is multiplied by 2.
  • Otherwise, the area is multiplied by 1.5.

Combining Arithmetic and Comparison Operators

You can combine arithmetic and comparison operators to construct more complex conditions within a ternary operation.

Example:

(svLineItem_qty >= 100 && Double_Sided) ? area * 2.5 : area;

In this example:

  • If svLineItem_qty is greater than or equal to 100 and Double_Sided is true, the area is multiplied by 2.5.
  • Otherwise, the area remains the same.

Understanding the proper use of *, /, +, -, >, <, >=, <=, and % is crucial for constructing effective ternary operations in shopVOX. By mastering these operators, you can write concise and efficient conditional logic that enhances your custom configurations and improves code readability. Use this guide as a reference to ensure you are applying these operators correctly in your ternary operations.

How did we do?

Product Templates - How to Turn on a Product Template

Unlocking Efficiency: Harnessing System Variables and References to Create a Click Charge

Contact